Product Search
Wind and Hydro
Back to Price List
Printer Friendly Version
MNCLIP4KACX.X
Model
Price
Size
Shipping
Weight
MNCLIP4KACX.X
$2530.00
25.5"L x 15.5"W x 5.25"D
28"L x 18"W x 11"D
50 lbs
Model
MNCLIP4KACX.X
Price
$2530.00
Size
25.5"L x 15.5"W x 5.25"D
Shipping
28"L x 18"W x 11"D
Weight
50 lbs
DESCRIPTION:
4,000 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.


Generally speaking if your turbine has larger than a 10 foot rotor diameter and or is rated for 2.5KW or more you may need more than one clipper. Please consult tech support


Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Generally speaking if your turbine has larger than a 10 foot rotor diameter and or is rated for 2.5KW or more you may need more than one clipper. Please consult tech support

The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a stand alone self powered adjustable max VOC limiting circuit. The AC Clipper is designed to work with AC turbines and was designed for 3-4kw maximum turbines. The AC Clipper comes standard with 1.6 ohms of resistance per phase. We can custom build other resistance values upon request and have designed an easy to change resistor insert for the Clipper allowing changes in the field.

The 4,000 watt AC Clipper comes in several different resistance values. The standard values available are 0.4, 1.0, 1.6 and 4.0 ohms per phase. Please add the value to the part number (For Example MNCLIP4KAC1.6) Please contact Customer service for help picking the correct resistance or if you need a value not listed.



AVAILABLE IN THE FOLLOWING MODEL NUMBERS:
  • MNCLIP4KAC0.4
  • MNCLIP4KAC1.0
  • MNCLIP4KAC1.6
  • MNCLIP4KAC4.0
Environmental Rating - Type 1 (Indoor)

Turbine Matrix for the Clipper

Clipper Installation video at Ricks
Clipper Installation video at Tims

Warranty - 5 yrs.
Made in the USA

California Residents: Warning

ACCESSORIES
CLASSIC 150 - $925.00
The Classic 150 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B

CLASSIC 200 - $925.00
The Classic 200 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B

CLASSIC 250 - $1050.00
The Classic 250 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B

MNSPD-300-AC - $135.00
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.

MNSPD-300-DC - $135.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.

MNEDC 5A thru 100A - $27.00
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC

MNCCCK - $15.00
Nipple Kit - One inch close nipple, three one inch lock nuts and two insulating bushings.

MNCCB-L or MNCCB-R - $26.00
CHARGE CONTROL BRACKETS - Right/Left - Right or left hand charge control brackets. Fits OutBack, Xantrex and MidNite MPPT controllers.